Test Equipment
- Analyzers »
- Generators »
- Meters »
- Oscilloscopes »
- Power Supply »
- Other »
- AC Power Source
- Amplifiers
- Attenuators
- Bit Error Rate Testers
- Cable Analyzers
- Cables
- Calibrators
- Coaxial Detectors
- Communication Equipment
- Current Preamplifier
- Curve Tracer
- Data Acquisition
- Directional Bridge
- Electronic Load
- Frequency Counters
- Lock-in Amplifiers
- Optical
- Power Loggers
- Probes
N5532B-504 - Keysight (Agilent) Probe
- Model: N5532B-504
- Manufactured by: Keysight / Agilent Technologies
Keysight Agilent N5532B-504 Sensor Module, 100kHz to 4.2GHz
Description:
The N5532B is intended to be used with the N5531S. It is essentially a power sensor with a power splitter at the input. In use, the sensor module's two output cables are connected to a power meter (E4418/19, E4416/17, or N1911/12 Series) and the Performance Spectrum Analyzer (PSA) RF Input.
When using an N1911 or N1912 Series power meter, it is necessary to use an adapter (N5532B Option 019) to connect the output cable of the sensor module to the power meter. The sensor module is calibrated such that the power meter indicates the power supplied by the source under test.
Description:
The N5532B is intended to be used with the N5531S. It is essentially a power sensor with a power splitter at the input. In use, the sensor module's two output cables are connected to a power meter (E4418/19, E4416/17, or N1911/12 Series) and the Performance Spectrum Analyzer (PSA) RF Input.
When using an N1911 or N1912 Series power meter, it is necessary to use an adapter (N5532B Option 019) to connect the output cable of the sensor module to the power meter. The sensor module is calibrated such that the power meter indicates the power supplied by the source under test.
Your IP Address is: 3.15.240.236
Copyright © 2024 RFTE Solutions