Test Equipment
- Analyzers »
- Generators »
- Meters »
- Oscilloscopes »
- Power Supply »
- Other »
- AC Power Source
- Amplifiers
- Attenuators
- Bit Error Rate Testers
- Cable Analyzers
- Cables
- Calibrators
- Coaxial Detectors
- Communication Equipment
- Current Preamplifier
- Curve Tracer
- Data Acquisition
- Directional Bridge
- Electronic Load
- Frequency Counters
- Lock-in Amplifiers
- Optical
- Power Loggers
- Probes
M9703A - Keysight (Agilent) Communication Equipment
- Model: M9703A
- Manufactured by: Keysight / Agilent Technologies
Keysight Agilent M9703A AXIe 12-bit High-Speed Digitizer/Wideband Digital Receiver with options DDC, F10, FRF, INT, and M16 (see description below)
Options Installed:
DDC – Wideband real-time digital down-conversion
F10 – Full bandwidth
FRF – Optimized dynamic range
INT – Interleaved channel sampling functionality
M16 – 16 GB (1 GS/ch) acquisition memory
Applications
Multi-channel applications requiring phase coherency, wideband frequency analysis, high dynamic range
Radar and satellite: antenna array calibration and test, electronic warfare (EW) radar emulation, passive radar receiver, or multi-band SATCOM monitoring
RF Communications: Multichannel Baseband-IQ (BBIQ) and wideband MIMO for emerging standards research (e.g. 5G)
Advanced research large scale experiments in hydrodynamics, plasma fusion (Tokamak/Stellarator), particle physics, or microwave astronomy
Functionality
8 channels of DC to 2 GHz input frequency range, 12-bit resolution
Up to 3.2 GS/s sampling rate (when interleaved)
Multi-module processing synchronization for >100 phase coherent channels
On-board FPGAs for custom processing or OTS wideband real-time DDC
Description:
Based on the AXIe standard the M9703A is an 8-channel, 12-bit wideband digital receiver/digitizer, able to capture signals from DC up to 2 GHz at 1.6GS/s. A channel interleaving capability allows waveform acquisition at up to 3.2 GS/s with exceptional measurement accuracy.
The M9703A also provides real-time data processing with four Virtex 6 FPGAs and very long acquisition capability which can be accessed for custom processing implementation with the W1462BP SystemVue FPGA Architect. The SystemVue ESL design software provides an integrated design-to-test flow, with rich communication and A/D processing libraries as well as an automatic push button programming approach, allowing to accelerate customer’s design.
The M9703A FPGAs optionally feature real-time digital downconversion (DDC), allowing tuning and zooming on the signals to be analyzed. The DDCs improve the dynamic range, reduces the noise floor, and extends the capture time for an accelerated measurement speed. This feature also enables an accelerated connection to the software measurement layer, such as the 89600 Vector Signal Analysis, for faster signal analysis.
The multi-module processing synchronization allows building a system of >100 phase-coherent channels with the M9514A 14-slot AXIe chassis.
Options Installed:
DDC – Wideband real-time digital down-conversion
F10 – Full bandwidth
FRF – Optimized dynamic range
INT – Interleaved channel sampling functionality
M16 – 16 GB (1 GS/ch) acquisition memory
Applications
Multi-channel applications requiring phase coherency, wideband frequency analysis, high dynamic range
Radar and satellite: antenna array calibration and test, electronic warfare (EW) radar emulation, passive radar receiver, or multi-band SATCOM monitoring
RF Communications: Multichannel Baseband-IQ (BBIQ) and wideband MIMO for emerging standards research (e.g. 5G)
Advanced research large scale experiments in hydrodynamics, plasma fusion (Tokamak/Stellarator), particle physics, or microwave astronomy
Functionality
8 channels of DC to 2 GHz input frequency range, 12-bit resolution
Up to 3.2 GS/s sampling rate (when interleaved)
Multi-module processing synchronization for >100 phase coherent channels
On-board FPGAs for custom processing or OTS wideband real-time DDC
Description:
Based on the AXIe standard the M9703A is an 8-channel, 12-bit wideband digital receiver/digitizer, able to capture signals from DC up to 2 GHz at 1.6GS/s. A channel interleaving capability allows waveform acquisition at up to 3.2 GS/s with exceptional measurement accuracy.
The M9703A also provides real-time data processing with four Virtex 6 FPGAs and very long acquisition capability which can be accessed for custom processing implementation with the W1462BP SystemVue FPGA Architect. The SystemVue ESL design software provides an integrated design-to-test flow, with rich communication and A/D processing libraries as well as an automatic push button programming approach, allowing to accelerate customer’s design.
The M9703A FPGAs optionally feature real-time digital downconversion (DDC), allowing tuning and zooming on the signals to be analyzed. The DDCs improve the dynamic range, reduces the noise floor, and extends the capture time for an accelerated measurement speed. This feature also enables an accelerated connection to the software measurement layer, such as the 89600 Vector Signal Analysis, for faster signal analysis.
The multi-module processing synchronization allows building a system of >100 phase-coherent channels with the M9514A 14-slot AXIe chassis.
Your IP Address is: 18.222.117.136
Copyright © 2024 RFTE Solutions