Test Equipment
- Analyzers »
- Generators »
- Meters »
- Oscilloscopes »
- Power Supply »
- Other »
- AC Power Source
- Amplifiers
- Attenuators
- Bit Error Rate Testers
- Cable Analyzers
- Cables
- Calibrators
- Coaxial Detectors
- Communication Equipment
- Current Preamplifier
- Curve Tracer
- Data Acquisition
- Directional Bridge
- Electronic Load
- Frequency Counters
- Lock-in Amplifiers
- Optical
- Power Loggers
- Probes
TPR4000 - Tektronix Probe
- Model: TPR4000
- Manufactured by: Tektronix
Tektronix TPR4000 4 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT
Features:
Compatible with the 6 series MSO, 5 series MSO, MDO3000, MDO4000C, MSO/DPO5000B, DPO7000C, and DPO70000C/DX/SX oscilloscopes
Bandwidth: DC coupling mode: TPR1000 - DC to 1 GHz and TPR4000 - DC to 4 GHz
DC reject mode: TPR1000 - 10 kHz to 1 GHz and TPR4000 - 10 kHz to 4 GHz
Linear dynamic range: Up to 60 V DC, 1Vp-p to bandwidth
Attenuation: 1.25x3
Measurement accuracy: DC linearity: <0.1% and Step response long-term aberrations: ±1%
Noise: <300 µVp-p noise on 6 Series MSO (20 MHz BW Limit) and <1 mVp-p noise on 6 Series MSO (Full Bandwidth)
Input impedance: 50 kΩ DC to 10 kHz and 50 Ω AC > 100 kHz
Temperature range at tip: -40 to +85 °C (standard accessories) and -40 to +155 °C (high temperature cable option)
Offset: ±60 V offset range and Offset setting error: ±2 mV max, ±0.4 µV typical
Description:
Active power rail probe provides a low noise, large offset range solution for measurement of ripple on DC power rails ranging from -60 to +60VDC. It is suitable for probing chipsets for power rail voltage supply and control in automotive, industrial and consumer markets, probing digital power management, memory and Ethernet connectivity, probing noise sources on high-frequency power rails.
Features:
Compatible with the 6 series MSO, 5 series MSO, MDO3000, MDO4000C, MSO/DPO5000B, DPO7000C, and DPO70000C/DX/SX oscilloscopes
Bandwidth: DC coupling mode: TPR1000 - DC to 1 GHz and TPR4000 - DC to 4 GHz
DC reject mode: TPR1000 - 10 kHz to 1 GHz and TPR4000 - 10 kHz to 4 GHz
Linear dynamic range: Up to 60 V DC, 1Vp-p to bandwidth
Attenuation: 1.25x3
Measurement accuracy: DC linearity: <0.1% and Step response long-term aberrations: ±1%
Noise: <300 µVp-p noise on 6 Series MSO (20 MHz BW Limit) and <1 mVp-p noise on 6 Series MSO (Full Bandwidth)
Input impedance: 50 kΩ DC to 10 kHz and 50 Ω AC > 100 kHz
Temperature range at tip: -40 to +85 °C (standard accessories) and -40 to +155 °C (high temperature cable option)
Offset: ±60 V offset range and Offset setting error: ±2 mV max, ±0.4 µV typical
Description:
Active power rail probe provides a low noise, large offset range solution for measurement of ripple on DC power rails ranging from -60 to +60VDC. It is suitable for probing chipsets for power rail voltage supply and control in automotive, industrial and consumer markets, probing digital power management, memory and Ethernet connectivity, probing noise sources on high-frequency power rails.
Your IP Address is: 18.216.21.252
Copyright © 2024 RFTE Solutions